How to Install a Garage Door

Are you wondering how to install a garage door? There are many reason people have for installing a garage door but, not many actually know how to do it themselves. Most people will hire a contractor to help them when they do not need help. To make sure you are on track is all you have to do is get through a few steps. You will need to determine what you will need to install, how to remove the existing garage door, and then install a garage door. If you follow these steps, your new garage door will be installed in no time.

How to install a garage door Step 1

The first step is figuring out what you need. First, you will need a new garage door that matches the measurements for the garage door opening. Then you will need the following to install; a drill, multi driver, screws, special tubing, and the new garage door. To extract the old garage door, you will need some of these tools: a clamp, ladder, pliers, and a helper.

How to install a garage door Step 2

The second step is to take out the old garage door. First, you will need to check the tension springs. If the door is closed you should open the door to reduce the tension in the springs. Next, disable the garage door opener and use a clamp below the wheels to lock the garage door in place. This will stop all movement of the door while working. Now, you will need to get on the ladder and relieve the pressure on one side. The springs on both sides can be safely dismantled, so you will do so now. Make sure your helper is present to lower the garage door. The door can on average weigh 150 lbs.

How to Install a Garage Door Step 3

The third step in the process is to install a garage door. You will first place the weather stripped panels onto the entranceway. Then, you hammer the jambs in their place to position the door in properly. Next, put the hinges on the top of the door. When hinges are placed, put the tracks together with rollers and brackets attached. Following this, put the tracks on each of the doorways. Then, connect all hinges and put the vertical tracks’ discs to the wall and mount jamb brackets in place. Then, but the curved and horizontal tracks together and level the trim while attaching hanger in permanent place. Finally, put door in permanent location and dispose of interim nails, and install torque tube.

Many people wonder how to install a garage door but don’t know where to turn. This leads them to hire help, but it’s not necessary to do so. If you follow these three steps on how to install a garage door, you are sure to have a successful installation and save money that you would have spent hiring someone to help. So go now and install your new garage door.